RFQ Preparation Checklist
- Share payload, wheel size, slope, speed, and acceleration target
- Provide motor data, voltage system, and gearbox envelope
- State noise, backlash, IP, and lifetime expectations
- List prototype quantity and production ramp plan
← Back to Solutions
AGV AMR Gearbox Platforms
Gearbox selection support for mobile robot platforms, drive wheels, steering modules, lift units, and autonomous warehouse equipment.
Target Buyer:AGV and AMR OEM teams seeking stable gearbox supply for platform development and production.
Solution Highlights
- Mobile robot gearbox selection by payload, slope, wheel radius, and duty cycle
- Compact and low-noise gearbox paths for indoor robots
- Sample validation planning for battery-powered platforms
Common Use Cases
- AGV drive wheel modules
- AMR steering and lift systems
- Autonomous warehouse carts
- Mobile inspection robots
Implementation Focus
- Wheel torque, gradeability, and braking load
- Efficiency and heat inside compact mobile modules
- Noise target for indoor logistics environments
- Bearing load, vibration, and service life
Application Evaluation Matrix
| Evaluation Metric | Typical Range | Buyer Relevance |
|---|---|---|
| Gradeability torque | Payload and slope dependent | Underestimating slope torque leads to heat, stalling, and poor battery performance. |
| Module noise | Buyer-defined dBA limit | Indoor AMR platforms face stronger acoustic requirements than factory-only equipment. |
Risk and Mitigation
- Bench test ignores vehicle heat buildup: Validate inside the real module with payload, slope, duty cycle, and ambient assumptions.
- No clear production ramp: Separate prototype, pilot, and mass-production quote assumptions.
Recommended Products
Buyer FAQ
Can one gearbox fit both AGV drive and steering?
Usually no. Drive, steering, and lift modules have different torque, backlash, envelope, and duty requirements.
Can you quote from a target wheel torque?
Yes. Provide wheel radius, payload, speed, slope, acceleration, and motor data so the gearbox ratio and torque margin can be screened.
Related Resources
Engineering review: send your application requirements
Inquiry Email
Please attach 2D/3D CAD drawings, target torque/speed, and quantity.