11
product families mapped
Review which product-family documents are public, which files require model-fit confirmation, and what inputs engineering needs before releasing matched datasheets, 2D drawings, STEP, IGES, or SolidWorks envelopes.
11
product families mapped
5
matched package layers
0
open generic CAD files
1
model-fit gate before release
CAD release is connected to manufacturable housing, shaft, bore, flange, and motor-adapter decisions. Public planning files stay lightweight; configured engineering files are released after fit review.
Each file package moves from open family guidance to project-specific CAD and inspection documents only after the buyer context is clear.
Open website page
Use it to decide whether the family is plausible before sending drawings.
Released after first model fit
Use it to align engineering and sourcing before prototype or quote approval.
Released after revision and interface check
Use it to verify installation fit and assembly clearance before design-in.
Released after model, ratio, and interface are locked
Use it for layout, interference review, and machine assembly planning.
Released with quote, PO, or shipment plan as applicable
Use it to align supplier qualification, incoming QC, and logistics before shipment.
The public status cards identify the package ID, accepted CAD formats, minimum inputs, release gate, and manifest governance for each gearbox family.
RGB-RG-CAD
Released after model fit review.
Package layers: public brief / matched datasheet direction / 2D interface drawing / STEP/IGES/SolidWorks envelope / inspection checklist
RGB-IA-CAD
Released after duty-cycle and interface review.
Package layers: public brief / matched datasheet direction / 2D interface drawing / STEP/IGES/SolidWorks envelope / RFQ risk notes
RGB-HD-CAD
Released after load case review.
Package layers: public brief / load review notes / 2D interface drawing / 3D installation envelope / inspection request list
RGB-HS-CAD
Released after bore and cable pass-through review.
Package layers: public brief / hollow-bore envelope / output flange drawing / sealing notes / inspection checklist
RGB-CY-CAD
Released after incumbent model cross-check.
Package layers: replacement review checklist / interchange risk notes / replacement envelope / interface comparison list / incoming QC checklist
RGB-AGV-CAD
Released after wheel, brake, and motor stack review.
Package layers: public brief / drive stack envelope / mounting drawing / thermal notes / packing checklist
RGB-HMR-CAD
Released after joint stiffness and interface review.
Package layers: public brief / reducer envelope / motor-side interface drawing / output-side interface drawing / validation notes
RGB-RV-CAD
Released after axis load and mounting review.
Package layers: public brief / RV reducer envelope / mounting and pilot drawing / load-screening notes / inspection request list
Released after shaft and ratio configuration review.
Package layers: public brief / configured gearbox envelope / shaft arrangement drawing / mounting position notes / export packing checklist
Released after right-angle layout review.
Package layers: public brief / right-angle gearbox envelope / shaft orientation drawing / accessory notes / packing checklist
RGB-COUP-CAD
Released after shaft and misalignment review.
Package layers: public brief / coupling envelope / bore and keyway drawing / selection notes / inspection checklist
No open universal CAD download; each 3D file is tied to product family, ratio, interface, and revision assumptions.
2D pilot, bolt circle, shaft, bore, and motor-adapter details are checked before release.
The inspection file scope is captured during RFQ or PO planning instead of after shipment.
Matched packages include a review context and should be treated as project-specific until the buyer approves reuse.
Start from the product page or asset index to select the gearbox family and application context.
Provide torque, ratio, backlash, mounting, duty cycle, drawing status, and incumbent evidence when relevant.
Engineering checks interface, load case, orientation, lubrication, and document requirements.
The buyer receives the configured datasheet direction, drawing package, CAD envelope, or inspection file set that matches the reviewed requirement.
No. The public website provides RFQ worksheets and package manifests. Matched STEP, IGES, or SolidWorks files are released after engineering confirms the product family, ratio, interface, motor adapter, and drawing revision.
A gearbox envelope can change with ratio, shaft or bore interface, motor adapter, lubrication position, and bearing load. The release gate prevents a wrong file from entering the buyer machine layout.
Send the RFQ worksheet, target torque and speed, ratio, backlash target, mounting drawing, motor frame, quantity plan, destination, and any incumbent nameplate photos if replacing an existing gearbox.
Family-level guidance is public. Model-specific datasheet direction, interface drawings, inspection scope, run-in records, and export documents are matched to the reviewed requirement.
Attach the RFQ worksheet, current drawings, incumbent nameplate photos, motor frame, ratio, torque, speed, backlash target, quantity plan, destination, and required inspection documents. Engineering will confirm the file package scope before release.
Inquiry Email
Please attach 2D/3D CAD drawings, target torque/speed, and quantity.