Compact gearboxes for AGV and AMR drive, steering, lift, and wheel modules where low noise, compact size, and stable supply matter.
| Metric | Typical Range | Why It Matters |
|---|---|---|
| Drive torque margin | Payload and slope dependent | Mobile robots must handle acceleration, ramps, and floor variation without overheating. |
| Noise target | Application-specific dBA limit | Warehouse and indoor robots often require lower acoustic noise than heavy factory gearboxes. |
Public Selection Matrix
Use this matrix to identify the right engineering review path before requesting model-specific CAD, drawings, or a drop-in replacement check.
| Subseries | Scope | Public Specs to Check | Buyer Use |
|---|---|---|---|
| Wheel hub drive gearbox | Compact wheel drive gearboxes for AMR and AGV modules with payload, wheel diameter, and brake-stack checks. |
| Use this family when the gearbox is integrated inside or beside the vehicle wheel module. |
| Steering module gearbox | Steering reducers for autonomous vehicle drive modules with angle, cable routing, and mounting reviews. |
| Use this family when the vehicle module needs independent wheel steering. |
| Shuttle and warehouse robot gearbox | Small-format reducers for warehouse shuttles, sortation systems, and compact mobile platforms. |
| Use this family when noise, size, and repeated stop-start operation dominate the selection task. |
RGB-AGV
Engineering checks wheel load, braking requirement, compact envelope, and heat before sending matched CAD.
Product-family brief and RFQ worksheet are public.
Released after wheel, brake, and motor stack review.
STEP, IGES, SolidWorks, 2D PDF on request
Use the no-login worksheets before sending drawings or requesting model-specific CAD. They help engineering confirm torque, backlash, interface, inspection, and replacement assumptions for AGV AMR Drive Gearbox.
Yes. Common custom points include ratio, output interface, housing envelope, sealing, and bearing arrangement.
Payload, wheel radius, slope, target speed, acceleration, duty cycle, motor data, and module envelope are the main inputs.
Inquiry Email
Please attach 2D/3D CAD drawings, target torque/speed, and quantity.
