# Robotized Gearbox Engineering Brief

Revision: Public family brief rev 2026-07-26
Family code: RGB-RG
Product page: /products/robotized-gearbox
Owner: Robotized Gearbox engineering resource desk
Source register: Product-family profile register
Last reviewed: 2026-07-26

## Public File Status

Product-family brief and RFQ worksheet are public.

This public brief supports early RFQ screening and buyer-side engineering review. It is not a final model-specific datasheet, certified 2D drawing, STEP, IGES, or SolidWorks release.

## Best-Fit Use

Robot joint, external axis, and integrated automation gearbox RFQs.

## Subseries and Public Specification Matrix

### AMT clutch actuator review

Scope: Robotized manual transmission clutch actuation, stroke control, and feedback compatibility for commercial and mobile machinery programs.

Public specs to check:
- clutch stroke and force window
- position feedback interface
- mounting envelope match

Buyer use: Use this path when replacing or localizing AMT clutch actuator modules around an existing gearbox and ECU package.

### Gear selection actuator and shift fork interface

Scope: Shift/select motor assemblies, fork interface checks, sensor alignment, and harness-level fit review.

Public specs to check:
- select and shift travel
- fork and lever geometry
- sensor and connector pinout

Buyer use: Use this path when the gearbox housing remains fixed but the robotized shifting package needs a drop-in review.

### Integrated robotized reducer assembly

Scope: Cycloidal, planetary, or strain-wave reducer packages for robotic joints, rotary stations, and automated fixtures.

Public specs to check:
- ratio 10:1-200:1
- low-backlash target
- servo flange and output bolt circle

Buyer use: Use this path when the buying task is a complete motion-axis reducer package rather than an AMT service component.

## Minimum Inputs Before Matched Files

- Output torque and speed
- Ratio and backlash target
- Motor flange or adapter drawing
- Output shaft or bore interface

## CAD and Datasheet Release Gate

Released after model fit review.

Engineering confirms ratio, motor adapter, output interface, and duty cycle before sending matched files.

## Matched Package After Review

- Family datasheet direction
- Matched 3D envelope
- 2D interface drawing
- Inspection document checklist

## Public Downloads to Pair With This Brief

- public family brief
- RFQ template
- asset index
- inspection request

## Recommended Worksheet Links

- Gearbox RFQ Template: /resources/gearbox-rfq-template.csv
- Engineering Asset Index: /resources/gearbox-engineering-asset-index.csv
- CAD Package Manifest: /resources/gearbox-cad-package-manifest.csv
- Replacement Review Checklist: /resources/replacement-review-checklist.csv
- Inspection Document Request: /resources/inspection-document-request.csv

## Buyer Review Notes

- Use this brief to decide whether the product family is plausible before sending confidential drawings.
- Attach torque, ratio, backlash, duty cycle, mounting, quantity, destination, and incumbent evidence when available.
- Ask engineering to confirm the configured model, interface, revision, and inspection-document scope before using any matched CAD file in a machine layout.